Getting A New Septic System Installed? Tips For Caring For Your System

Posted on: 29 May 2023

If you're scheduled for septic system installation, make sure you know how to care for your system. When you have a septic system, you're responsible for your residential waste disposal. That's why you need to provide the right care. Read the list below. Here are three tips to protect your new septic system. 

Service Septic Tanks

When it comes to protecting your septic system, one of the best things you can do is stick to a service schedule. You might think that pumping is the only service your septic system needs, but that's not the case. Your septic system needs three services. First, your septic system needs to get pumped at least once every three to five years. Next, your septic tanks need to get cleaned to remove sludge. And, the septic drains need to get cleaned. These services will keep your waste flowing. 

Track Seepage Field

If you want to protect your septic system after it gets installed, make sure you track the seepage field. The seepage field is where wastewater goes to get absorbed into the soil. If the seepage field gets compromised, wastewater will surface. That's where wastewater comes to the surface. When that happens, the soil will get saturated with water.

Depending on how bad the problem is, you might see puddles forming in the soil above the seepage field. You can avoid these problems by providing the right care for your seepage field. That includes limiting the amount of chemicals you send down the drain. Chemicals can interfere with soil absorption.  

Control Wastewater

If you're learning how to care for your new septic system, you need to think about the waste that gets sent to the tanks. There are two types of waste that septic systems process. Those are liquid waste and solid waste. Solid waste includes food and fecal matter. Liquid waste includes everything from toilet water to washing machine water. Fecal matter stays in the main septic tank. All wastewater flows through to the second tank, and on into the seepage field.

That's why you need to control the wastewater. Too much wastewater at one time will cause problems for your septic system. Luckily, there are steps you can take to control wastewater. First, install low-flow fixtures throughout the house. Second, take shorter showers. Finally, adjust the water levels on your washing machine for every load. That way, the water level matches the load size. 

For more information, contact a company such as McMullen Septic Service, Inc.

Share